Best way and tape to use two for tone rims?

[Guest]

I am going to post this here and see if I get more answers?

The green tape seems to want to move and mess thing up if taping off the rim so you can shoot another color in the center. How and what tape do you all like to use?

I taped the center and that seemed to work ok with the green tape around the edges and folded over to aluminum foil. Its just doing the opposite that is the problem.

[Guest]

Re: Best way and tape to use two for tone rims?

I BOUGHT THIS TAPE FROM PBTP,MATTHEW SAID YOU CAN WRAP IT AROUND A BOWL. IT ALSO WORKS ON WHEELS.IT WORKED FINE FOR ME.STAYED EXACTLY WHERE I PUT IT.

[Guest]

Re: Best way and tape to use two for tone rims?

I BOUGHT THIS TAPE FROM PBTP,MATTHEW SAID YOU CAN WRAP IT AROUND A BOWL. IT ALSO WORKS ON WHEELS.IT WORKED FINE FOR ME.STAYED EXACTLY WHERE I PUT IT.

I just bought a couple of rolls from them but what one are you talking about beside their normal green one?
Thanks

[Guest]

Re: Best way and tape to use two for tone rims?

THIS IS SOFT AND GRAYISH IN COLOR .WORKS GREAT,IT'S SOME SORT OF FABRICATION SUPPLY,MAYBE MATTHEW OR KING CAN HELP YOU FURTHER.

[Guest]

Re: Best way and tape to use two for tone rims?

I just did a set of rims black center polised lip. I used 1 inch 3M brand green painters tape to mask the edge where the lip meets the center of the wheel. I put the rim in the oven for 5min or till the wheel temp was 150. Pulled the wheel out and pulled the tape nice clean lines to bad the rest of the wheels looked like trash. They were a freebee job for a friend they are only his track wheels.

[Guest]

Re: Best way and tape to use two for tone rims?

I just did a set of rims black center polised lip. I used 1 inch 3M brand green painters tape to mask the edge where the lip meets the center of the wheel. I put the rim in the oven for 5min or till the wheel temp was 150. Pulled the wheel out and pulled the tape nice clean lines to bad the rest of the wheels looked like trash. They were a freebee job for a friend they are only his track wheels.

I guess I give that a try? Hard to remove any thing that is just fresh powder so I guess having it maybe start to flow you can get the 3m tape off easy with out powder disruption? I guess practice will help?

Now to get some more test rims to do

Thanks