Announcement

Collapse
No announcement yet.

Atomizing Air in the Authentic Hopper

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Atomizing Air in the Authentic Hopper

    The atomizing air is increased from zero to a level that is satisfactory
    to provide a smooth and uniform powder pattern. Care must be taken
    to avoid excessive atomizing air. Its purpose is to provide the energy
    to distribute the powder and transport it through the powder hose.
    Too much atomizing air will deliver the powder at a velocity that will
    produce excessive overspray and rebound from the part surface. Typically,
    the atomizing air is the same as or lower than the delivery air.
    After the atomizing air is adjusted, it may be necessary to slightly
    increase the flow air in order to maintain the desired powder output.

  • #2
    Re: Atomizing Air in the Authentic Hopper

    Sorry, I got caught up the the word desired Nice legs by the way HD

    Comment


    • #3
      Re: Atomizing Air in the Authentic Hopper

      How about another angle?

      Comment

      Working...
      X
      😀
      🥰
      🤢
      😎
      😡
      👍
      👎