Finally finished oven!

[Guest]

I still have some odds and ends things to do to the oven but the hard part is over FINALLY! woohoo

2x2 square framing and 20ga sheet


min wool insulation


Inside dimensions are 5x4x6!


Teds Controller box! Window with hinge!


Cramped quarters Spray booth in background.

All welds! Not a bolt or rivet on it

[Guest]

Re: Finally finished oven!

Congratulations!! Good job.

[Brune292]

Re: Finally finished oven!

Im afraid to add up the receipts but I'm thinking it should be under $2K

[Guest]

Re: Finally finished oven!

Looks good Brune, cant wait till mine is done. Almost there.

[Brune292]

Re: Finally finished oven!

If I remember right, it was about $500 in square tubing, $450 for the sheet steel, $120 for the insulation, and about 7 rolls of wire for the mig welder The control box was $265. So actually its gonna end up being less than $2k.

[Guest]

Re: Finally finished oven!

7 rolls of wire,must of been the small ones.I have a 11lb spool in mine.
Oven looks great too,what did you use for a light inside

scott

[Brune292]

Re: Finally finished oven!

7 rolls of wire,must of been the small ones.I have a 11lb spool in mine.
Oven looks great too,what did you use for a light inside

scott

Yes, they were the small ones. I didnt even know they made rolls that big! I used 2 lights that you have on the inside of household ovens. Its brighter than what I thought it would be

[Guest]

Re: Finally finished oven!

Thx,i will look into those for my new oven

scott

[Brune292]

Re: Finally finished oven!

I found those on ebay, 2 for $40 brand new
Or sabotage old kitchen ovens.

[Guest]

Re: Finally finished oven!

Thx again
I will check with the guy on e bay i got the elements from

scott