lime green

[Guest]

hi everyone. im new to the forum. just wondering if anyone has or could post a good sample of lime green.im going to be doing a dirt modified chassis and want to sure about the green im using. im trying to get as close to arctic cat green as possible thanks,matt

[Guest]

Re: lime green

Welcome to the forum!


I don't have a lime green but I do have Candy Dew Green if it helps I'm not familiar with Arctic Cat colors.

[Guest]

Re: lime green

Welcome
Did you check this one out
LIME GREEN
[375F/15MIN] $12.99 $5.00

http://www.powderbuythepound.com/catalo ... ts_id=1627

LIME GREEN ~ POLYESTER ~ CURE TIME = 375F/15 MIN @ PMT (PART METAL TEMPERATURE) ~ GLOSS LEVEL = 81-90% ~ SPECIFIC GRAVITY = 1.3 ~ RECOMMENDED MIL THICKNESS = 2.0 - 3.0 MILS ~ THEORETICAL COVERAGE = 147.92 SQ. FT./LB @ 1 MIL ~ SALT SPRAY RESULTS = 1,000+ HOURS.

scott

[Guest]

Re: lime green

to scott yeah i did thats why i was seeing if anyone had a sample. that seemed to be close to arctic cat green

[Guest]

Re: lime green

heres one i have, if it helps

[wiseguyz]

Re: lime green

Welcome to the forum.

Best of luck.

[Guest]

Re: lime green

I've used it. It could pass for John deer green very easy.

[Brune292]

Re: lime green

Here is the best picture I have of it.....(see the sprocket hanging off the axle?) Its PBTP Lime green. It matches Kawasaki just about perfect and I think the Arctic Cat is the same.

[Guest]

Re: lime green

pbtp lime green /emerald illusion top[attachment=0:37b47nna]Lime green.jpg[/attachment:37b47nna]