Another price, as I don't have a clue on this type of stuff

[Guest]

Had a guy drop these off tonight. Need light cleaning, blasted and some masking. These are off of an 85 Thunderbird. Breather tubes, throttle body etc ?? Are all aluminum, no high heat other then normal engine heat. Wants them in Ultimate Chrome. Any help price or otherwise appreciated. Thanks.

Sorry about the double price help post.

[JHForman]

Re: Another price, as I don't have a clue on this type of stuff

Had a guy drop these off tonight. Need light cleaning, blasted and some masking. These are off of an 85 Thunderbird. Breather tubes, throttle body etc ?? Are all aluminum, no high heat other then normal engine heat. Wants them in Ultimate Chrome. Any help price or otherwise appreciated. Thanks.

Sorry about the double price help post.

I would go 50 on the 2 pipes, and 75 for the intake. Just me, but im not good with pricing either !! I seem to under cut myself on a regular basis.

[BeeBob]

Re: Another price, as I don't have a clue on this type of stuff

Don't forget you'll have to add clear to that...

[Guest]

Re: Another price, as I don't have a clue on this type of stuff

Bump - I need and idea on pricing for the above items. Outgas, sand blast, blow off, wipe down, Chrome, clear. Getting ready to finish these. Anyone for pricing?
Thanks!

[ATL Powder]

Re: Another price, as I don't have a clue on this type of stuff

Single coat 125, W/ clear 180..............

[Streetwerkz]

Re: Another price, as I don't have a clue on this type of stuff

$200-$250 alot of prep, and masking there

[Guest]

Re: Another price, as I don't have a clue on this type of stuff

I would tend to agree with the 200 dollar range, that is quite alot of masking areas.

[redlinecustomsms]

Re: Another price, as I don't have a clue on this type of stuff

$200-$250 alot of prep, and masking there

i agree

[Guest]

Re: Another price, as I don't have a clue on this type of stuff

With the masking & a clear coat $200 at a min

[Guest]

Re: Another price, as I don't have a clue on this type of stuff

Thanks everyone, I was at around the $200 mark. You folks just verified it. Will post them when done.